 |
 
The correct alignment and constraint area for constructing a logotype or signature with one line is shown on the left. The vertical signature is the preferred form, although both vertical and horizontal signatures are correct. The maximum length for one line is 30 characters, including punctuation and spaces. All graphic elements must align correctly.
- For a logotype, here is how to determine the constraint area. Measure the height of the capital letter, called “c,” a measurement in inches or millimeters. The empty area surrounding the logotype (called the area of non-encroachment) must be at least as much as that measurement (“c”).
- For a signature, here is how to determine the constraint area. Measure the height of the logo, called “x-space,” a measurement in inches or millimeters. The empty area surrounding the logo(called the area of non-encroachment) must be at least half that measurement (“½ x”).
Keep the area of non-encroachment free of other graphic elements, including typography, illustrative material, other logos or the edge of a working area (such as trim edges of paper and borders).
The PPG corporate logo is a registered trademark. To protect the corporation’s proprietary rights, the logo may appear only in its approved form, as described in the Basic Identity Structure section.
If you have questions, please contact globalidentity@ppg.com.
|